Rocom Doortello Home Guide de l'utilisateur télécharger pdf (Page 17)

User guideDoortello HomeIssue 1.00

Page 17

ensured only by this timer. This security will be lost if you deactivate this

feature. If you have connection error it can happen that the device will be

blocked on the line. In this case you need to separate the telephone line and

the power supply to reset the device.

Please note!

Connection time below 30 seconds will not be accepted as then a

reprogramming of the device is no more possible.

Dial pause time

It is possible to program using the code ##3 a dial pause within the telephone

numbers programmed for the chime button and speed dial codes. This time as a

default value of 2 seconds, but can be changed using the following procedure:

*#7 OK tone #2 {dial pause time in s} OK tone

Values from 1 to 9 can be used. The input of the value 0 will deactivate the

dial pause feature.

Example:

n You want to change the dial pasue to 5 seconds. Input:

*#7 OK tone #25 OK tone

Interdigit dial pause

The Doortello Home will dial the programmed telephone numbers using an

interdigit dial pause. This has a value of 150 ms as default. It is possible to

change this value following this procedure:

*#7 OK tone #3 {interdigit pause time in ms} OK tone

You can use values between 100 and 999.

Example:

n You want to change the interdigit dial pause to 300 ms. Input:

*#7 OK tone #3300 OK tone

Please note!

You need to change this value only if you are experiencing problems with the

dial, i.e. wrong dialling.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Pas de commentaire

Rocom Doortello Home Guide de l'utilisateur Page 17