Rocom Doortello Home Guide de l'utilisateur télécharger pdf (Page 13)

User guideDoortello HomeIssue 1.00

Page 13

With the Doortello Home it is possible to define which status the loudspeaker

has to have after the line seizure. You can define if it has to be on or off. Form

factory the loudspeaker is always on, but you can modify this, i.e. if you don’t

want to hear the dial and call progress tones. You can select between 5 diffe-

rent operating methods:

Loudspeaker always on 1

The loudspeaker is on as soon you press a button. All dial and call progress tone

can be heard. The loudspeaker is switched by the speakerphone using the half-

or full duplex modality as programmed. (Default)

Loudspeaker always on with manual switch activated 2

The loudspeaker is on as soon you press a button. All dial and call progress tone

can be heard. The loudspeaker is switched by the speakerphone using the half-

or full duplex modality as programmed. Using the DTMF digit 4 the

loudspeaker can be manually activated (manual switched speakerphone). Using

the digit 6 the speakerphone is switched back in the programmed automatic

modality.

Loudspeaker off until call answer 3

The loudspeaker is off after pressing a button. All dial and call progress tone

can not be hearted. As soon as the called party answers the call (speech

detection) the loudspeaker is switched on. Afterwards the loudspeaker is

switched by the speakerphone using the half- or full duplex modality as

programmed.

Loudspeaker off until manual activation 4

The loudspeaker is off after pressing a button. All dial and call progress tone

can not be hearted. Dialling the digit 6 after call answer the loudspeaker is

manually activated. Afterward using the digit 4 the speakerphone is switched

on manually, and with the digit 6 the speakerphone is switched back in the

programmed automatic modality.

Loudspeaker always off 0

The loudspeaker is always off. This status is used for testing purposes only.

To change the operating method of the loudspeaker after line seizure please

follow this procedure:

*#3 OK tone #2 {loudspeaker operating mode} OK tone

Example:

n You want that the loudspeaker is off after pressing a button and switched

reprogrammed only from factory.

Loudspeaker status after line seizure

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Pas de commentaire

Rocom Doortello Home Guide de l'utilisateur Page 13