Rocom Doortello Business FW T2.05W2.04 Guide de l'utilisateur télécharger pdf (Page 8)

User guideDoortello BusinessIssue 1.02

Page 8

Attention! The microphone

must be coincide exactly

with a hole in the plate.

Doortello Business. Behind panel installation

Cabling of the chime buttons

As already mentioned the chime button module are connected with the

Doortello Business ES unit using the flat cable of the DB bus. Up to 32 chime

button modules can be connected. please consider that the last module can

have only 3 button. This mean that you can have up to 127 chime buttons

connected to the system.

Each button has a decimal address form 001 to 127. This addresses are allocated

using the DIP swith that you can find on the chime button modules. Each DIP

switch selection allocates 4 fixed addresses for each module. I.e. the frist modul

will have the addresses from 001 to 004, the second one from 005 to 008, and so

on. If the module you are addressing is not fully equipped with all four buttons,

i.e. if you are using modules with 1, 2 or 3 buttons only, you will loose the address

which are not used. I.e. if the first module has only two buttons only the addresses

003 and 004 are used. The addresses 001 and 002 are lost. If the second module

has only 3 buttons only the addresses 006, 007 and 008 are used, the address 005

is lost.

The dial pad module is recognized automatically by the device and for the 4

programmable button, which can be find of the module, for fixed addresses will

be assigned: 128 („handset“), 129 („key“), 130 („name“) und 131 („lamp“).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Pas de commentaire

Rocom Doortello Business FW T2.05W2.04 Guide de l'utilisateur Page 8